Product Advantages
Balanced Capacity for Medium Load Centers
The 800 kVA rating serves projects between small auxiliary transformers and larger main-distribution units.
Useful for Replacement Planning
Overall dimensions, terminal positions and cable entry can be reviewed against the existing installation before drawings are approved.
Epoxy-Encapsulated Windings
Cast resin insulation supports oil-free indoor service under the stated environmental conditions.
Electrical Coordination
Voltage ratio, taps, vector group and impedance are selected to match upstream protection and downstream equipment.
Factory Documentation
Applicable routine testing and project documentation are prepared to the agreed specification.
SCB12 800 kVA Cast Resin Dry Type Transformer
Product Introduction
The SCB12 800 kVA cast resin dry type transformer is a practical choice for medium-size commercial and industrial distribution loads. It can be configured for new installations or replacement projects where the electrical rating must be coordinated with available room space, existing cables, ventilation and switchgear.
Typical Applications
Typical projects include production workshops, warehouses, commercial buildings, water facilities, infrastructure buildings and plant expansions. For replacement work, provide photographs, existing nameplate data and dimensional constraints with the inquiry.
Typical Project Configuration
Model: SCB12
Rated Capacity: 800 kVA
Construction: Three-phase epoxy cast-resin dry type
Primary and Secondary Voltage: Project specific
Frequency: 50 Hz or 60 Hz
Conductor: Copper or aluminum, as specified
Cooling: AN; AF if engineered
Enclosure: To approved installation requirement
Applicable Standards: IEC, IEEE or customer specification, as applicable
Testing: Applicable routine factory tests
Frequently Asked Questions
Can this unit replace an existing transformer?
Yes, subject to confirming rating, impedance, vector group, dimensions, terminal arrangement, cable entry and protection coordination.
What site information is important?
Provide room dimensions, ventilation, altitude, ambient temperature, dust or moisture exposure and required access clearances.
Are loss values fixed?
Final no-load and load losses depend on the approved design and applicable efficiency requirement. Confirm them in the project data sheet.
Quotation Information
For a new or replacement 800 kVA project, include the existing nameplate and photographs where applicable, plus voltage, vector group, impedance, dimensions, terminal arrangement, cable direction, enclosure, accessories and destination.
